There are trends that not everyone has to understand. Hanging your own bike on the wall or under the ceiling in the living room is certainly one of them. How does it work, which holders are the most popular and why decorating with a bike isn’t all that crazy?
Unfortunately, bicycles are still the most popular prey for thieves. If you don’t have a garage and don’t want to park your bike in the basement, you almost only have one chance: the racer has to go into the garage with you. Sounds strange – but more and more cyclists are doing it these days. They then park it on the balcony or in a room, where it usually gets in the way in the long run. Much smarter: hang the bike on the wall or ceiling.
In this article we explain what you should pay attention to, what options there are for ceiling and wall mounts for your bike and how you can make them yourself with a little craftsmanship.
Wall mount for the bike: Three important questions before buying
When it comes to bike wall mounts, impulse purchases are a bad idea. Before you strike and pull out the drill, a few questions should be answered.
- How heavy is the bike you want to hang?
- How much space do you have on the wall where the bike will later be placed?
- Is the wall of your choice actually suitable for this (keyword: material)?
- What additional material do you need for assembly?
As a rule, they are retro bikes, racing bikes, fixies or other pieces of jewelry that are “displayed” on the wall in the living room or study. They usually weigh no more than ten kilograms. Before you buy, check whether the mount you want is designed for this weight. If you have any doubts as to whether the wall is up to the task, use slightly larger dowels and screws to be on the safe side. The same applies to bikes that are to be hung from the ceiling. And there is something else you should consider when choosing the right ceiling or wall mount.
1. Fischer bicycle lift
Let’s start with a practical, space-saving and inexpensive solution for the garage. The works like a pulley. The bike is attached to the handlebars and saddle with two hooks and then easily pulled up to the ceiling. The length of the rope should be sufficient for a ceiling height of up to four meters. The cable pull has two advantages. The frame of the bike is not resting on anything and therefore cannot be damaged or scratched. This saves your back because you don’t have to lift the bike to hang it up. And because it’s not on the ground, you also protect the tires.
2. Hiplok Airlok bike mount
It is more suitable for the hobby room in the apartment . It is made of steel and weighs a sporty five kilograms. According to Uvex, the holder is also designed for outdoor use. If the Airlok is attached to the wall and the bike is hung, a 30 millimeter steel bolt secures the bike from thieves. The scope of delivery includes three coded keys with which the bolt is locked. Uvex also supplies the special screws and suitable dowels. To protect the frame, the hanging area is coated with a rubber coating.
3. Madeco bike mount “FlyBike”
If you like it even more stylish, you should consider this ponder. The U-shaped body is made of solid beech plywood. Depending on the furnishings, the top layers are available in an oak or dark walnut look. “FlyBike” is available for handlebar widths of up to 50 centimeters and slightly more expansive ones with a width of up to 62 centimeters. The troughs into which the bike is hung with the top tube can be individually lined with colored wool felt (from Germany). To ensure that the bike stays on the wall, Torx screws, the appropriate dowels and a drilling template are included in the scope of delivery. However, the two-wheeler should not be heavier than 20 kilograms.
4. Parax bicycle holder S-Rack
A whole shelf is used for this as a holder for your favorite bike. With handlebar widths of 50 to a maximum of 70 centimeters and seven optional colors, almost every bike will fit and almost every taste will be met. The manufacturer specifies the maximum diameter for the top tube as 55 centimeters. After assembly, this lies softly in a v-shaped notch lined with felt. The Parax’s black or white-coated aluminum housing has a wooden base that is available in walnut, birch and other looks. The S-Rack is 24 centimeters wide and, depending on the handlebars, protrudes between 30 and 40 centimeters into the room. Torx screws, dowels, protractor and drilling template are included. Tip: Racing bikes feel most comfortable in the narrow version. Gravel and mountain bikes require a little more space.
Source: Stern
I am an author and journalist who has worked in the entertainment industry for over a decade. I currently work as a news editor at a major news website, and my focus is on covering the latest trends in entertainment. I also write occasional pieces for other outlets, and have authored two books about the entertainment industry.
