The TPMS (TIRE Pressure Monitoring System) aims to alert the driver when the wheels have an air level below or above the recommended levels. Key data not to suffer inconveniences.
He Pneumatic pressure sensorknown as TPMS (Tire Pressure Monitoring System)it is an active security component present in most of the vehicles Modern.
The content you want to access is exclusive to subscribers.
Its main function is to alert the driver when one or more tires have a pressure below or above the recommended levelswhich can affect vehicle stability, tire wear and fuel consumption.


What to do if the warning light of the tires remains on?
After correcting the pressure of the tires, it is common for the warning light of the TPMS to remain on. This does not always indicate a failure, but in many cases the system needs to be manually restarted to recognize the new values.
Pneumatic.jpg

After correcting the pressure of the tires, it is common for the warning light of the TPMS to remain on. This does not always indicate a failure, but in many cases the system needs to be manually restarted to recognize the new values.
Pixabay
Steps to restart the TPMS:
-
Verify tire pressure:
Use a pressure gauge to verify that the pressure of the four tires (and the spare, if applied) coincides with the values indicated by the manufacturer. This information is usually on a label located within the framework of the driver’s door or in the vehicle manual.
-
Put the contact without starting the engine:
With the engine off, turn the key or press the power button to the contact position (without turning the engine).
-
Locate the TPMS restart button:
This button is usually found in the central console, under the steering wheel or inside the glove compartment. Check the vehicle manual if you can’t easily locate it.
-
Hold the button:
Press the button until the tire pressure witness blinked three times. This indicates that the system has begun the restart process.
-
Driving to complete the recalibration:
In some vehicles, it is necessary to drive for several minutes for the system to update the information and turn off the warning light.
When to go to a workshop?
Yes, after performing the restart, The indicator is still on or comes again shortly after, it could be a problem with one of the sensors, the TPMS system battery or even a slow loss of air. In those cases, it is recommended to go to a specialized service center to carry out a more thorough review.
Source: Ambito

I’m a recent graduate of the University of Missouri with a degree in journalism. I started working as a news reporter for 24 Hours World about two years ago, and I’ve been writing articles ever since. My main focus is automotive news, but I’ve also written about politics, lifestyle, and entertainment.