24hoursworld

Step by step to clean air conditioning filters

Step by step to clean air conditioning filters

These parts must be cleaned from time to time as they can hinder the operation of the equipment and affect our health.

He air-conditioning They are usually used to cool a room or office during the summeris also often used in winter. However, these devices use filters that accumulate dust and dirt over time and that can affect your normal functioning. Therefore, it is recommended cleaning.

Step step: how to clean air conditioning filters

Unplug the air

Before opening the equipment to see them filtersit is recommended to have it off and even unplug it to make sure you don’t have electric current that we can receive.

air-conditioning-cleaning-domestic-employee.jpg

The equipment must be cleaned every certain amount of time.

The equipment must be cleaned every certain amount of time.

Depositphotos

Raise the equipment cover

The vast majority of these teams usually have a large cap above the space where the air comes out. We will have to open it, either by touching a button or simply opening the flap. There we will find the filters what we should clean.

Be careful

Because the dirt Of these parts it is composed mostly of accumulated dustmust cover our nose if we know that we have any allergy to these substances to avoid allergic reaction. This precaution is because we will have to get close enough to remove these parts from the air.

Clean with warm water

Already with the filters removed and in the hand, we must use warm watera cloth microfiber and with a neutral soap to get all the dust and land They can have. It is not recommended to use lavandina or chemicals since the residues of these substances will remain in the filters and subsequently in the air.

Air conditioning.jpg

If not cleaned, filters can accumulate a lot of dirt.

If not cleaned, filters can accumulate a lot of dirt.

Let the filters dry and replace them in the air.

Once all the dirtWe must leave ventilate and dry the filters before reinstalling them equipment.

Put them back in the air conditioning

When we notice that they are dry, we must install them in it equipment and in the position in which we find them. Once this is done, we will have to close the lid that covered them and plug your cable.

How to use air conditioning efficiently

For leverage and use the equipment in the best possible way during times of high heathe National Electricity Regulatory Entity recommends taking the following Actions:

Air conditioning label.jpg

Before purchasing the equipment, it is recommended to see its specifications that it has on the sheet that must be attached.

Before purchasing the equipment, it is recommended to see its specifications that it has on the sheet that must be attached.

  • Set the temperature at 24 ° C. The electrical consumption of some equipment increases up to 8% for each degree below that threshold.

  • When the conditioner is on, close doors and windows to prevent the entry of outside air into the air-conditioned environment.

  • Turn off the computer when that environment is abandoned.

  • To ensure the operation of the equipment, clean filters every six months.

Source: Ambito

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest Posts